Cleaning/Disinfection - LINET Image 3 B Instructions For Use And Technical Description

16 Cleaning/Disinfection

WARNING!
Risk of injury when working on the bed!
► Prior to assembly, disassembly, cleaning and maintenance, ensure that all adjustment functions are locked.
► Ensure the bed is disconnected from the mains during cleaning process.
► Pay extra attention when cleaning any movable or controlling mechanisms of the bed to prevent involuntary
activation, entrapping or crushing.
► Cleaning should be entrusted to the person who has been trained to control the bed.
WARNING!
Risk of damaging the bed due to use of incorrect cleaning detergents or cleaning processes!
► The bed is not designed for machine washing.
► The bed is not designed for cleaning by spraying, showering nor for pressure or steam cleaners.
► The selection of cleaning detergents/disinfections and their correct concentration is responsibility of responsible
person in charge of cleaning/disinfection in accordance with the informations provided in this manual.
► Never use germicidal or other radiants for disinfection of the bed, if those radiants act directly on the bed.
► Follow these instructions and follow the prescribed dosage by the manufacturer of cleaning detergents.
► Not following recommended processes may result in damaging or deterioration of the bed condition.
► Check if used cleaning agents and disinfectants are compatible with materials that the product consists
of! For information see the following table.
BED COMPONENTS THAT ARE
INTENDED TO BE CLEANED
Do not clean what is not mentioned
in this column!
Head board and foot board
Head siderails and foot siderails
Mattress support platform covers
(Backrest)
Seat section
Castors
Castor control levers
Frame of the mattress support plat-
form
Undercarriage
Corner covers
Corner bumpers
Keyboards (Attendant Control Panel,
Handset, control elements integrated
in the siderails)
CPR levers
Labels
Accessory rail
Actuators
Linen Shelf
D9U001AM2-0101_06
MATERIALS (SURFACES OF THE MENTIONED BED COMPONENTS)
Competent user is responsible for check if used cleaning agents and disinfectants
are compatible with mentioned materials!
powder coated steel version:
Lacquered steel + High Pressure
Laminate (HPL)
single collapsible siderails (3/4 siderails): Lacquered steel + Polyamide (PA) + Polyoxy-
methylene (POM) + Acrylonitrile butadiene styrene (ABS) + Polyvinyl chloride (PVC)
Polypropylene (PP)
Lacquered steel
Polyurethane (PUR) + Polyamide (PA) + Polypropylene (PP)
Polyamide (PA6) + Lacquered steel
Polyamide (PA) + Lacquered steel + Stainless steel
Acrylonitrile butadiene styrene (ABS) + + Lacquered steel
Acrylonitrile butadiene styrene (ABS)
Polypropylene (PP) + Polyamide (PA)
Acrylonitrile butadiene styrene (ABS) + Polyoxymethylene (POM) + Polyethylene tereph-
thalate (PET)
Polyamide (PA6)
Polyethylene terephthalate (PET)
Polyoxymethylene (POM) + Lacquered steel
Polyamide (PA6) + Aluminium (Al)
aluminium Linen Shelf: Oxidized
aluminium alloy + Zinc-coated steel +
Stainless steel + Acrylonitrile butadi-
ene styrene (ABS) Polyamide (PA)
+ Polyoxymethylene (POM)
aluminium version with HPL board: Oxidized
aluminium alloy + Lacquered steel + Stainless
steel + High Pressure Laminate (HPL) + Polya-
mide (PA)
iron Linen Shelf: Lacquered steel + Zinc-coated
steel + Polyamide (PA)
45