Net-Total Formulation - Sartorius Cubis Series Operating Instructions Manual

Net-total Formulation

Display symbol: +
Purpose
With this application program you can weigh in different components up to a
defined total. You can print out both the total weight and the individual weights
of the components.
Features
– Weigh up to 99 components from "0" to a defined total component weight.
– Store component weights ("Store xx comp."), with
– display zeroed automatically after value is stored, and
– automatic printout
– Clear component memory following cancellation of the weighing sequence
by pressing F and printout the total weight.
– Toggle between component weight and total weight by pressing and
holding S.
– Printout the total of the individual component weights (T-Comp)
Preparation
§ Select the Net-total application in the menu.
See the chapter entitled "Configuration"
§ Configure parameters:
Applic. Application programs
Net-TotL Net-total formulation
Comp.Prt. Printout of components
Off
o
On
o = Factory settings
Printout: Net-total formulation
Comp 2+ 278.1 g
T-Comp+ 2117.5 g
Using the Balance
: Second component
: Sum of components
Operating Instructions Cubis MSE 51