Calculation - Sartorius Cubis Series Operating Instructions Manual

Calculation

Display symbol:
Purpose
With this application program you can calculate weight values using a multiplier or
divisor.
This can be used, for example, to determine the weight per unit area, or "gsm"
weight (grams per square meter), of paper
Setting the Factor or Divisor
Activate function:
Press the S key
Select a number of up to 8 digits and, if needed, one decimal point (0.0000001 –
99999999):
In increments of 1: Press the S key briefly
To increase the value without pressing repeatedly: Press and hold the S key.
The selected operator is stored in battery-backed memory.
Preparation
§ Select the "Calculation" application in the menu.
See the chapter entitled "Configuration"
§ Configure parameters:
Applic. Application programs
Calc. Calculation
Method (Operator)
o Mul. Multiplier
div. Divisor
Dec.Plcs. Number of decimal places
NoNE No decimal places
o 1 Dec. Pl. 1 decimal place
2 Dec. Pl. 2 decimal places
3 Dec. Pl. 3 decimal places
o = Factory settings
Printout: Calculation
Mul + 1.2634
Div + 0.6237
Res + 79.7 o
Using the Balance
: Multiplier
: Divisor
: Result
Operating Instructions Cubis MSE 47