User Interface; Overhead Tube Crane; Direction Of Movement; Sound Signal - Canon Omnera 500A Operator's Manual

3 User Interface

3.1 Overhead Tube Crane

The overhead tube crane (OTC) can be moved to the correct position by autopositioning,
motorized movements or manual movements.
The OTC has a display that shows patient information, information of the tube angulation
and the selected workstation etc. The exposure parameters are shown and can easily be
changed from the OTC.

3.1.1 Direction of Movement

The figure below shows the movements of the OTC.
Z
0
Z
Y
X

3.1.2 Sound Signal

• One sound signal, means that the OTC is in position and ready for exposure.
• Two sound signals, in rapid succession, indicates a fault and the display will show an error
message, for example after a collision. The error message shows the corrective action.
Operator´s Manual
2020-09-14
Y
X
Fig. 3-1 OTC direction of movement
Vertical movement
Lateral movement
Longitudinal movement
1000-095-071-EN Rev. 1.1
Page 55
Overhead Tube Crane
Alpha
Beta
Motorized
Motorized and manual
Motorized and manual
User Interface
OMNERA®