Table of Contents
Advertisement
Front-Panel Key Reference
File
Name
Only capital letters (A-Z) and digits (0-9) may appear in file names
NOTE
(8 characters, maximum). Additionally, file names include a 3 character
extension which is automatically set by the instrument.
Dir Up
Dir Select
Accesses menu keys that allow you to load analyzer setups, states,
Load
traces, limits and corrections into the analyzer from a floppy (A:) drive
or internal flash (C:) drive.
Key Access:
Load Now
Type
98
When
is set to
Type
,
,
Antenna
Cable
Other
you to select the type of correction to be saved.
When
is set to
Type
and
menu keys.
Limit 2
sets to determine whether a trace has exceeded preset
specifications. Limit sets can hold up to 200 points and
can only be saved individually.
Key Access:
File, Save
Accesses the Alpha Editor and allows you to enter a
filename. The external keyboard can also be used to
enter a filename while the alpha editor is accessed.
Key Access:
File, Save
Allows you to move up one directory level. If at the top
level,
moves to the drive level, displaying the
Dir Up
available disk drives.
Key Access:
File, Save
Accesses the highlighted directory on your display.
Key Access:
File, Save
File
Executes the load function. When the load is complete,
the message XXXXXX file loaded (where XXXXXX is
the filename) will appear in the status line on your
display.
Key Access:
File, Load
Allows you to select the type of file you want to load.
Displays all setup files you may wish to
Setup
load (.SET). Setup files include a
complete set of instrument parameters
including traces, states, limits, and
corrections. Loading a setup restores
the analyzer (as closely as possible) to
all previous instrument settings at the
time of the save.
,
accesses the
Corrections
Source
and
menu keys, which allow
User
,
accesses the
Limits
Source
and
Limit 1
Limit 2
Limit 1
provide data
Chapter 2
Advertisement
Table of Contents
