Agilent Technologies EMC Series User Manual page 151

Edit Comment
Peak Ampl
Chapter 2
Front-Panel Key Reference
the signal, the marker in the upper
window is moved to the frequency of
the signal, and if the frequency is not
currently on the screen, the analyzer is
tuned to that frequency (center
frequency).
Key Access:
MEASURE
List Edit
Pressing this key enables the comment
field for display in the signal list.
Key Access:
MEASURE
List Edit
Change
Comment
Pressing this key will activate the
Alpha Editor and display the selected
comments (if any). The backspace
arrow key (←) may be used to erase
individual characters in the comment.
The Alpha Editor can be used to add
characters to an existing comment or
add comments to the list. This key is
only active when there are signals in
the list and the list is being displayed.
Key Access:
MEASURE
,
List Edit Edit Comment
Clear
Comment
Pressing this key clears the comment
for the selected signal from the signal
list. This key is only active when there
are signals in the list and the list is
being displayed.
Key Access:
MEASURE
,
List Edit Edit Comment
Pressing this key will enable the peak
delta values for display in the signal
list.
Key Access:
MEASURE
List Edit
MEASURE
, , ,
More Signal List
, , ,
More Signal List
, , ,
More Signal List
, , ,
More Signal List
, , ,
More Signal List
151