Table of Contents
Advertisement
Signal List
Report
When
Format
trace accompanied by the analyzer state. The
format is readable by a spreadsheet on your PC, but
cannot be loaded back into the analyzer. The TRC
format cannot be loaded into a PC, but can be loaded
back into the analyzer. TRC files include the state of
the analyzer and restore all settings when loaded.
When
between bitmap and metafile formats.
screen image in Graphics Interchange Format (GIF)
and
Metafile
Metafile Format (WMF).
Metafile
traces to green so they can be printed visibly and with
less use of black ink. Screen images cannot be loaded
back into the analyzer.
Key Access:
When
Source
trace
all traces in a single .trc file, along with the state.
Chapter 2
for cable loss). A correction set may
hold up to 200 points. Pressing
Corrections
Refer to the
Key Access:
Displays all previously saved signal list
files (.LST) and detects the current
signal list in preparation to save it in a
file for retrieval at a future date. The
signal list files contains a list of signals
which include the frequency and
measured amplitudes for each signal.
Key Access:
Displays all previously saved report
files and detects the current report in
preparation to save it in a file for
retrieval at a future date. Report files
are saved in a (.HTM) file type format.
The Report files can contain the screen
in GIF format, the signal list, and the
analyzer setup. The report files contain
a hyperlink to the GIF file of the
analyzer screen.
Key Access:
is set to
,
Type
Trace
Format
is set to
,
Type
Screen
saves the screen image in Windows
Reverse Bitmap
turn black backgrounds to white and yellow
File, Save
is set to
,
Type
Trace
Source
,
, or
along with state. Saving trace
1
2
3
Front-Panel Key Reference
activates the
Source
key description.
Source
File, Save, Type, More
File, Save, Type, More
File, Save, Type, More
allows you to save a
CSV
allows you to choose
Format
saves the
Bitmap
and
Reverse
allows you to save
All
File
key.
saves
97
Advertisement
Table of Contents
