Table of Contents
Advertisement
This key is only available when the
User Preset
System
User Preset
User Preset
factory preset state is loaded. If the user preset state has been saved
but the load fails for any reason, the error message: Unable to load
user state is displayed in the status line and the state is reset to
whatever it was before the
happen if firmware has been upgraded or applications have been
(un)installed after the user preset state was saved.
be accessed by pressing
Key Access:
This key is only available when the
Mode Preset
System
Mode Preset
settings to the factory defaults and to continuous
sweeps/measurements.
Key Access:
This key is only available when the
Factory Preset
System
A factory preset is executed so all of the instrument modes are returned
to the factory default state. A factory preset will not reset "persistent"
functions such as GPIB address, time/date display style, or auto
alignment state to the factory defaults.
Key Access:
This key is only available when the
Save User Preset
System
This key saves the current state of the analyzer into the
state for recalling when the instrument is user preset. After you save a
state here, you must go to the
have this state used as the preset state.
Key Access:
Chapter 2
,
,
Power On/Preset
Preset Type
loads the analyzer configuration that existed when
was pressed. If
Save User Preset
Preset
System
Preset
,
,
Power On/Preset
Preset Type
does not change the mode. It only resets the current mode
Preset
,
,
Power On/Preset
Preset Type
Preset
,
,
Power On/Preset
Preset Type
Preset
key is set to
Preset Type
,
.
User
has never been pressed, the
key was pressed. This can sometimes
,
.
Power On/Preset
key is set to
Preset Type
,
.
User
key is set to
Preset Type
,
.
User
key is set to
Preset Type
,
.
User
key and select
Preset Type
Front-Panel Key Reference
Preset
. Press
User
Save
can
Save User Preset
. Press
User
. Press
User
. Press
User
User Preset
in order to
User
173
Advertisement
Table of Contents
