Table of Contents
Advertisement
Delete Mrkd
Accesses the submenu used for determining which
Remeasure
signal list elements are to be remeasured. As each item
is remeasured, the active trace screen is tuned to the
frequency and the current set of detectors is used to
perform the measurements. As results are completed,
they appear in the appropriate area in the signal list
display. If an error occurred during the sweep, then the
error is noted for that signal list item.
Key Access:
Signal List
On Off
Chapter 2
Yes
Executes the deletion of all the
elements of a signal list.
No
Cancels the deletion of all the elements
of a signal list.
Accesses the Delete Mrkd menu where
you can choose either Yes or No to
delete only the marked elements of a
signal list.
Key Access:
MEASURE
Delete Signals
Yes
Executes the deletion of the marked
elements of a signal list.
No
Cancels the deletion of the marked
elements of a signal list.
,
,
MEASURE
More
Signal List
Switches between signal list display
(split screen) and normal analyzer
display. The upper portion of the split
screen contains the live display. The
lower portion of the screen displays the
signal list. As the current signal list is
changed, the number displayed in the
menu key (list item index) is updated,
the signal, the marker in the upper
window is moved to the frequency of
the signal, and if the frequency is not
currently on the screen, the analyzer is
tuned to that frequency (center
frequency).
Front-Panel Key Reference
MEASURE
,
,
,
More
Signal List
155
Advertisement
Table of Contents
