Table of Contents
Advertisement
Verbose SCPI
On Off
Clear Error
Queue
Accesses the following menu keys.
Power On/Preset
Key Access:
Power On
Last Preset
Preset Type
Chapter 2
The information in the Error History Screen is
formatted to fit the screen size. Additional information
is available via the SYSTem:ERRor? command. It
indicates which SCPI command was executing when
the error occurred and what about that command was
unacceptable.
Example: First set SYST:ERR:VERBOSE ON
If the command SENSe:FREQuently:CENTer 942.6MHz
is sent, then sending SYST:ERR? returns:
–113, "Undefined
header;SENSe:FREQuently:<Err>CENTer 942.6MHz
$<NL>"
Key Access:
System
Clears the error queue in the
Key Access:
System
System
Determines the state of the analyzer when the analyzer
is powered on. If the Power On function is set to
the state of the analyzer is the same as it is after
is pressed, when the analyzer is powered on. If the
Power On function is set to
analyzer was in when it was powered off is recalled.
The setting (Last or Preset) of the Power On function is
not changed by pressing
menu key function to change the setting of
On/Preset
the analyzer state that is recalled at power on. Limit
lines are not recalled when the analyzer is powered on.
Refer to
"Preset"
Key Access:
System
Allows you to select User, Mode, or Factory preset.
Key Access:
System
Pressing
User
to the settings defined by the
Preset
chapter for more information.
Key Access:
Preset Type
Front-Panel Key Reference
,
Show Errors
Show Errors
,
Show Errors
, then the state that the
Last
. Use the
Preset
in this chapter for more information.
,
Power On/Preset
,
Power On/Preset
Preset (User)
key. Refer to
"Preset"
,
System
Power On/Preset
System (Local)
display.
,
Preset
Preset
Power
sets the analyzer
Save User
in this
,
195
Advertisement
Table of Contents
