Agilent Technologies EMC Series User Manual page 111

Scales the horizontal (x-axis or frequency) graticule divisions
Scale Type
logarithmically when
Log Lin
is selected, the horizontal divisions are linearly scaled.
In
of the number of sweep segments. For example, if you select 308 points
when 3 segments are required to create a logarithmic display, the
points will be set at 306 points. The span determines the minimum
number of sweep points. Pressing
Factory
Sweep time is auto-coupled when
NOTE
NOTE Marker Span Pair, Frequency Offset, Signal Track (On)
(On)
NOTE FREQUENCY, Scale Type (Log)
Zero Span, Signal Track (On)
Key Access:
Chapter 2
Scale Type (Log)
, the number of sweep points is limited to a multiple
Scale Type (Log)
) sets
Scale Type to Lin
, are not available when
FREQUENCY Channel
is selected. When
(when
Preset Preset Type
.
Scale Type (Log)
is selected.
Scale Type (Log)
is not available when
is selected.
Front-Panel Key Reference
FREQUENCY Channel
Scale Type (Lin)
is set to
is selected.
, and
Demod View
Frequency Offset
111