Table of Contents
Advertisement
I
! Risk of electrocution due to electric shock!
D
anger
Touching live parts of the system carries the risk of:
- An electric shock
- Damage to the electrical installation
- Destruction of the device
Before installing and connecting the device, make sure that the installation has been de-
energised. The rules for working on electrical systems must be observed.
1.9
Intended use
The RCMS410 device in conjunction with the specified measuring-current transformers (CT) is in-
tended for DC, AC, and pulsed DC sensitive residual-current measurement according to IEC
62020-1 .
Its area of application is the monitoring of residual currents I
TT and IT systems with I
DC...20 kHz
The devices are intended for operation in control cabinets or similarly protected environments.
For intended operation, observe the specifications in this manual.
Any other use than that described in this manual is regarded as improper.
≤ 120 A peak, where I
Δ
for preventive maintenance in TN,
Δ
is intended to be measured within a range of f =
Δ
RCMS410_D00424_00_M_XXEN / 09.2022
LINETRAXX® SmartDetect RCMS410
9
Advertisement
Table of Contents
Need help?
Do you have a question about the LINETRAXX SmartDetect RCMS410 and is the answer not in the manual?
Questions and answers