Pulsegenerator - IAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE

PulseGenerator

Configure pulse generator settings.
Related Topic: Pulse Generator
Pulse Generator Item
ClockPreScaler
PulseGeneratorClock (MHz)
PulseGeneratorSelector
PulseGeneratorLength
PulseGeneratorLengthMs
(ms)
PulseGeneratorFrequency
(Hz)
PulseGeneratorStartPoint
PulseGeneratorStartPointMs
(ms)
PulseGeneratorEndPoint
Setting Range Default Value
1 ～ 4096
297
- 0.25
0:PulseGenerator0
1:PulseGenerator1
0:PulseGenerator0 Select the pulse generator.
2:PulseGenerator2
3:PulseGenerator3
1～ 1048575 25000
- 100
- 10
0～ 1048575 0
- 0
1～ 1048575 12500
User Manual (Ver. Tentative) - Setting List
Set the division value for the prescaler (12 bit) using
PixelClock as the base clock.
Set the clock used for the pulse generator. This value is
calculated using the [ClockPreScaler] value as a base.
PulseGeneratorClock = SrcFreq / ClockPreScaler
SrcFreq:74.25
Set the maximum count-up value as a clock count.
Set the maximum count-up value in milliseconds.
This value is calculated using the PulseGeneratorLength
value as a base. The setting range varies depending on the
ClockPreScaler value.
PulseGeneratorLengthMs = 1/PulseGeneratorClock *
PulseGeneratorLength
Set the maximum count-up value as a frequency.
This value is calculated using the PulseGeneratorLength
value as a base.
PulseGeneratorFrequency = 1sec /
PulseGeneratorLengthMs
Set the start point of the High interval as a clock count.
When the counter reaches this value, the output will be 1.
Set the start point of the High interval in milliseconds. When
the counter reaches this value, the output will be 1. The
setting range varies depending on the ClockPreScaler
value.
PulseGeneratorStartPointMs = 1/PulseGeneratorClock *
PulseGeneratorStartPoint
Set the start point of the Low interval as a clock count. When
the counter reaches this value, the output will be 0.
- 103 -
Description