Table of Contents
Advertisement
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Chunk Data Function
Related Setting Items:
The Chunk Data function adds camera configuration information to the image data that is output from
the camera. In addition, when images are shot with a single camera in sequence under multiple setting
conditions, you can search for images by their setting conditions.
Configuring Chunk Data
1. Set ChunkModeActive to True.
Caution:
The Chunk Data function settings cannot be changed during image output. To change
the settings, stop Acquisition.
PTP (Precision Time Protocol)
Related Setting Items:
The camera can work as the slave for Precision Time Protocol defined in IEEE 1588. When the IEEE
1588 master clock exists in the network where the camera is connected, this function synchronizes the
camera to the time of the master clock.
Transport to be used: Multicast UDP datagram (224.0.1.129); however, Delay Resp is a unicast
l
UDP datagram.
Destination port number:
l
319 : Sync, Delay Req, Pdelay Req, Pdelay Resp
l
320 : Announce, Follow Up, Delay Resp, Pdelay Resp, Management, Signaling
l
Items for synchronization: Time synchronization is performed. Frequency tuning is not
l
performed.
PTP time data: 80 bit (elapsed time in 1 ns, with 00:00:00, January 1 1970 set as the origin)
l
Timestamp (this camera): 64 bit* (PTP synchronization: LSB64bit* of PTP time data)
l
Supported PTP messages: Announce message (receive only), Sync message (receive only),
l
Follow Up message (receive only), Delay Req message (send only), Delay Resp message
(receive only)
ChunkDataControl
TransportLayerControl
User Manual (Ver. Tentative) - Main Functions
- 80 -
Advertisement
Table of Contents
