Sample Triggersequencer Mode Operation - IAI GOX-5105M-5GE User Manual

Tentative version

Table of Contents

SequencerFrameCount: This configures the number of frame acquisitions for the selected

SequencerIndex.

SequencerReset: During TriggerSequencer mode operation, this switches the index number to be

executed to that specified in SequencerSetStart.

SequencerRepetition: This parameter applies to TriggerSequencer patterns which include an index

whose SequencerROINextIndex is set to 0 (OFF).

When the index whose SequencerROINextIndex is set to 0 (OFF) is finished executing, the value of

Sequencer Repetition (range = 1～255) is decremented internally. If the result of the decrement is not

zero, the TriggerSequencer pattern starts over from the index specified in SequencerSetStart. If the

result of the decrement is zero, the status changes to Acquisition Stop and external triggers are not

accepted.

Sample TriggerSequencer Mode Operation

User-Defined Indexes (Up to 32)

1. Specify "1" in SequencerSetStart, and start TriggerSequencer mode with index 1.

2. Based on the SequencerFrameCount setting (= 2), capture a 2-frame image with the first and

second triggers.

3. For the next index, configure index 3 specified in SequencerSetNext, and capture an image with

the number of frames (the number of triggers) specified in SequencerFrameCount (=1).

4. Proceed to sequence from index 4 to index 2 to index 1.

Note: In addition to repeating multiple conditions as in the above example, you can specify "0"

(which indicates the end of TriggerSequencer mode) in SequencerSetNext of index 2, and specify

the number of repetitions in SequencerRepetition.

User Manual (Ver. Tentative) - Main Functions

- 72 -

Table of Contents