IAI GOX-5105M-5GE User Manual page 85

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
DeviceControl Item
DeviceTLVersionMajor
DeviceTLVersionMinor
DeviceTLVersionSubMinor
DeviceLinkSelector
DeviceLinkSpeed
DeviceLinkHeartbeatMode
DeviceLinkHeartbeatTimeout
DeviceStreamChannelCount
DeviceEventChannelCount
DeviceCharacterSet
DeviceReset
DeviceRegistersEndianness
DeviceTemperatureSelector
DeviceTemperature
Timestamp
TimestampReset
TimestampLatch
TimestampLatchValue
UserDefinedValueSelector
UserDefinedValue
Default
Setting Range
Value
2 (Fixed) -
0 (Fixed) -
1 (Fixed) -
0 (Fixed) 0
125000000
-
Bps
0:Off
1:On
1:On
500000～
3000000
120000000
1 (Fixed) -
1 (Fixed) -
1: UTF8 (Fixed) -
- -
1:big-endian
-
(Fixed)
0: Mainboard
1: Sensor 0: Mainboard
2: FPGA
-55 ～ 125
0
0 ～ 64bit max 0
- -
- -
0 ～ 64bit max 0
0: Value1
1: Value2
2: Value3 0: Value1
3: Value4
4: Value5
-2147483648
0
～ 2147483647
User Manual (Ver. Tentative) - Setting List
Indicates the major version number of the device's Transport Layer.
Indicates the minor version number of the device's Transport Layer.
Indicates the sub-minor version number of the device's Transport
Layer.
Select Link.
Displays the negotiated transmission rate.
Enable/Disable Heartbeat mode.
Configure the timeout value for Heartbeat (unit: μs). Step: 1000
Display the number of supported stream channels.
Display the number of supported message channels.
Display the character encoding.
Reset the device.(After the camera receives this command, it returns
an ACK response and executes the reset.)
Display the register's endianness.
Select the area of the camera's interior for which to display the
temperature sensor's reading.
Display the internal temperature (°C) of the device specified by
DeviceTemperatureSelector.
Display the timestamp value (ns). Resets to 0 when the signed
maximum 64-bit value is exceeded.
Forcibly sets the timestamp's count value to 0.
Sets the timestamp's count value to TimestampLatchValue.
Maximum value Signed 64-bit max value.
Five 32bit data can be set and saved.
Selects one of the 32bit data (Value1 to Value5) set in
UserDefinedValueSelector, and reads and sets the value in
UserDefinedValue.
- 85 -
Description