Examples - IAI GOX-5105M-5GE User Manual

Tentative version

Table of Contents

How to Configure

1. Set GradationCompressionMode to On to enable the function.

2. Select a value for GradationCompression1stKneePoint to indicate where to start applying

compression on the intensity values coming from the sensor. The knee point is specified as a

percentage of the maximum digital value of the 8-bit compressed output (255).

3. Select a value for GradationCompression1stGain in order to set the slope angle at the first

knee point. Available values range from 0 dB (no compression) to -66 dB.

4. Use GradationCompression2ndKneePoint and GradationCompression2ndGain to define

an additional compression segment.

Note: 2ndKneePoint must be specified with a value greater than 1stKneePoint. The

maximum value is 200% when

SensorDigitizationBits is set to 12Bits.

Examples

The following examples show how Gradation Compression knee points and gain can be calculated

and applied.

SensorDigitizationBits

= 10Bits

- 61 -

User Manual (Ver. Tentative) - Main Functions

is set to 10Bits, and 800% when

Table of Contents