IAI GOX-5105M-5GE User Manual page 58

Tentative version

Table of Contents

1. First, find the scaling ratio for the ROI. To make the virtual pixel size of the new camera (GOX-

5105C) the same size as the current camera (GOX-2402C), the scaling ratio is "0.79" (2.74 ÷

3.45 = 0.79).

2. Next, configure the ROI settings for the new camera (GOX-5105C). Set the new camera's Width

and Height (ImageFormatControl) as follows:

a. Width: 1920 ÷ 0.79 = 2430. However, since the ROI Width Step is 4, set Width to "2432".

b. Height: 1200 ÷ 0.79= 1519. However, since the ROI Height Step is 2, set Height to "1520".

Note: If the specified ROI is larger than the supported resolution of the replacement

camera, you will need to switch to a replacement camera with a higher resolution.

3. Turn the new camera's ImageScalingMode On.

4. Set ImageScalingHorizontal and ImageScalingVertical to "0.789474" (1920 ÷ 2432 =

0.789474 and 1200 ÷ 1520 = 0.789474).

Note: ImageScalingHorizontal and ImageScalingVertical can be set up to 6 decimal places,

but eBUS Player may automatically round the value and display a different value.

5. Now the new camera's virtual pixel size is 3.45 μm x 3.45 μm, and the output image size is 1920

x 1200.

Example 3

If you are using a GOX-20405 with SensorWidth/SensorHeight of 4512, and you want to scale the

output image to 3000 x 3000, set ImageScalingHorizontal and ImageScalingVertical to"0.6649" (3000

÷ 4512 = 0.6649).

User Manual (Ver. Tentative) - Main Functions

- 58 -

Table of Contents