Siemens SITRANS FUG1010 IP65 NEMA 4X Instruction Manual page 14

Manual Addendum
3. Total Units
Total units are similar to flow units.
4. Sound Velocity Units
Sound velocity will continue to be reported in units of meters/sec for metric units but will change to
Feet/sec for English unit selection. The flowmeter will display M/S and F/S to represent these two
variations.
Note: The units for Sound Velocity will be based on the [Preferred Units] menu item found in
the [Meter Facilities] menu and can not be changed unless a new site is created.
5. Transducer Model Menu Name
The following table lists the operating system menu item differences between Version 3 Hi Precision
and Version 5 Hi Precision transducer model names that appear on the [Install Xdcr] menu. Note that
T1, T2 and T3 indicate the different temperature ranges of the transducer.
TOTALIZE UNITS
For STD VOLUME disabled
Version 3
CU FT
KCU FT
MCU FT
CUM
KCU M
MCU M
TOTALIZE UNITS
For STD VOLUME enabled
Version 3
CU FT
KCU FT
MCU FT
CUM
KCU M
MCU M
Version 3 Transducers
Hi Precision
1011HG Hi Prec.
Version 5
ACF
MACF
MMACF
M3
E3 M3
E6 M3
Version 5
SCF
MSCF
MMSCF
NM3
E3 NM3
E6 NM3
Version 5 Transducers
Hi Precision
1011HP-T1
1011HP-T2
1011HP-T3
A-3
1010FMA-56