The Table Setups Menu; Pipe Table; Pipe Table Menu Structure - Siemens SITRANS FUG1010 IP65 NEMA 4X Instruction Manual

Section 4

4.12.2 THE TABLE SETUPS MENU

The [Table Setups] menu allows you to pre-condition your pipe table and transducer types. The edits
made in [Table Setups] become the default settings for creating a new site. Transducers "marked" in the
[Transducer Types] menu will be preferentially selected when the meter recommends transducers dur-
ing the automatic Pick/Install Transducer routine.
To access the Table Setups menu press
Table Setups

Pipe Table

The factory-programmed pipe table describes over sixty standard English and metric pipes. The table
can save you programming steps by loading all required data at once from option list selection. The Pipe
Table configuration is [PIPE CLASSÆ Æ Æ Æ Æ PIPE NAME]. Pipe Class presents a list of standard metric and En-
glish Pipe classifications. Selecting a class (e.g., ASA Carbon Steel) conditions the Pipe Name option list
to all the stored pipes within that class (see Menu Chart above). Selecting a pipe by its name (e.g.,
2SS10) loads a description of that pipe in the remaining menu cells. Note that liner data is not provided.
If your pipe is lined, then you will be required to enter the liner material and its thickness manually.
To access the Pipe Table menu press

PIPE TABLE MENU STRUCTURE

Create/Edit Pipe
Ö
Ö
Ú
*NOTE: The highlighted selection in the above table illustrates how to choose the ASA Stain-
less Steel Pipe Class and all its available Pipe Name selections. All other Pipe Classes
(e.g., ASA Carbon Steel) listed can be selected in the same manner.
Ö Ú
Pipe Table
Transducer Type
Choose Pipe Class
Ö
Ú
Ú
Ö
Choose Pipe Name
Ú
Ú
ASA Stainless Steel*
ASA Carbon Steel
ASA Plastic
Metric DN Steel
Metric SGP Steel
Cast Iron Table
Ductile Iron Table
Copper Tube Table
ASA Stainless Steel* ASA Carbon Steel
1SS10
Ú
2SS10
3SS10
4SS10
6SS10
8SS10
Metric DN Steel
15-DN
20-DN
25-DN
40-DN
50-DN
100-DN
150-DN
4-78
1010GCNFM-3C
ASA Plastic
1CS40 1P40
Ú
1CS80 1P80
2CS40 2P40
2CS80 2P80
3CS40 3P40
3CS80 3P80
4CS40 4P40
4CS80 4P80
6CS40 6P40
6CS80 6P80
8CS40 8P40
8CS80 8P80
10CS40 10P40
10CS_XS 10P_XS
(continued)