How To Select A Pipe Class - Siemens SITRANS FUG1010 IP65 NEMA 4X Instruction Manual

Section 4
THE PIPE DATA MENU STRUCTURE (continued)
Pipe Data (cont.)
*NOTE: The highlighted selection in the above table illustrates how to choose the ASA Stain-
less Steel Pipe Class and all its available Pipe Size selections. All other Pipe Classes (e.g.,
ASA Carbon Steel) listed can be selected in the same manner.
4.2.1

HOW TO SELECT A PIPE CLASS

The FUG1010GCN pipe tables are arranged by classes of common type and material. The default selec-
tion is [Manual Entry]. As its name infers, you would use this selection to manually enter individual pipe
parameters.
To select a Pipe Class:
To access the [Pipe Class] option list press
To scroll through the available classes press
To select the class that fits your application press
When you pick a Pipe Class, the [Select Pipe Size] menu cell (see below) presents the pipe size option list
associated with the selected class. By using the pipe class and pipe size option lists, you automatically
load all the required pipe information. You can also select a pipe class/size, then edit any of the associ-
ated defaults to fine-tune the pipe data.
NOTE: Create custom pipe data via the Pipe Table editor in the Meter Facilities menu.
Ö
Pipe OD (in / mm)
Ö
Pipe Material
Ú
Ú
Ö
Wall Thickness
Ö
Pipe ID (in)
Ö
CC129 Thickness
Ö
ThermExp Coef 1/F
Ö
Mod Elast PSI
Ö
xx.xx (numeric entry).
(Auto if specific pipe is selected)
Ö
Steel
Ú
ABS
Aluminum
Black Iron
Brass
Cast Iron
CuNi (70/30)
CuNi (90/10)
Copper
Ductile Iron
FRP
Glass
Hastelloy
Inconel
Kynar (PVDF)
monel
Nickel
Polyethylene
PVC (Plastic)
Teflon
Titanium
Ö
x.xxx (numeric entry)
Ö
x.xxx (numeric entry)
Ö
x.xxx (numeric entry)
Ö
0.000
Ö
0.000
ENT
4-10
1010GCNFM-3C