Table of Contents
Advertisement
2 Installation
The following instructions are provided to help you to set up your video camera system quickly and easily. It is
suggested that you read through these instructions prior to unpacking and setting up your camera system
2.1
Getting Started
2.1.1
Unpacking Instructions
It is recommended that the original packing cartons for the cameras and lenses be saved in case there is a need
to return or exchange an item. It is also recommended that any equipment being sent to another location for
field installation be bench tested to assure that everything is fully operational as a system.
2.1.2
Components List
Please begin by checking your order against the Components List (below) to assure that you have received
everything as ordered, and that nothing has been overlooked in the packing materials. If any item is missing,
please contact your JAI, Inc. representative immediately.
•
TM-770, TM-775NIR or TM-773NIR camera
•
TM-77X data sheet (Download from
•
TM-77X Operations Manual (Download from
•
TM-77X Camera Control Software (Download from
2.1.3
Accessories
Following is a list of additional accessories or equipment that may be recommended or required for your
particular application. Please check with your JAI, Inc. representative prior to the installation of your video
system to determine what you might need.
•
Power Cable: 15P-02-9P-FULL or 15P-02-9P
•
Power Supply: PD-12UU
•
Tripod Mounting Kit: TP-50
(for dimensions go to: www.jai.com/EN/CameraSolutions/Products/Accessories/Pages/Home.aspx)
2.2
Camera Setup
2.2.1
Connector Pin Configurations
2.2.1.1
The TM-77X has a 15-pin connector for power input. The pins handle a number of input and output functions,
which will be discussed further in other sections.
Figure 2.
14
TM-77X Series
15-Pin Connector
15-Pin Connector
Hardware Installation
www.jai.com
)
www.jai.com
)
www.jai.com
)
Advertisement
Table of Contents
