Mounting The Vivid I/Vivid Q To The Cart - GE Vivid i SafeLock Cart Supplement To User’s Manual

Using the cart

Mounting the Vivid i/Vivid q to the cart

CAUTION
16
The Vivid i/Vivid q can be mounted either while the
display screen is closed (system is fully shut-down or
in standby mode) or while the display screen is open
and the system is powered ON, OFF or in Standby.
NOTE: A battery or an empty battery-shell should
always be attached to the system before mounting
system to the cart.
Use caution when mounting system while it is
turned-on, to avoid shocks or vibrations which may
be harmful to the hard-drive.
To mount the Vivid i/Vivid q on the cart:
1. Tilt the Vivid i/Vivid q carrying handle upwards
so that it does not interfere with the mounting
procedure.
2. Hold the Vivid i/Vivid q slightly tilted towards you
and place the front bottom part over the front
sliding guides.
Figure 2-2: Placing on front sliding guides
Vivid i SafeLock Cart
5410856-100 Rev. 01