Section 4: Viewer Configuration Controls; Wan Login - Honeywell HEN04112 User Manual

Section 4: Viewer Configuration Controls

WAN Login

After you have successfully logged in, you will be in WAN mode. In WAN mode, you can select
different channels and different modes at the bottom of the interface.
Table 1-2 Viewer Configuration Controls
Button Name
Video Quality
Fluency
Full Screen
Vertical Synchronization
Single-channel Window
Four-channel Window
Description
Click to select the video quality. Select either
High quality or Low quality.
Click to configure the fluency. Select from
Fluency Level 1, Fluency Level 2, Fluency
Level 3, Middle level, Latency Level 1,
Latency Level 2, and Latency Level 3.
Click to switch the viewer to show video full
screen. Click Esc (on your PC) to quit full
screen.
Click to configure vertical synchronization.
Click to switch to single channel viewing.
Click to switch to switch to four channel
viewing.
800-21261V2 - A - 03/2016
Logging In | 23