Honeywell HEN04112 User Manual page 84

84 | Performance Series Full Poe Embedded NVR Remote User Guide
User Name
There are two default users:
•
•
The hidden default user is for internal use only, and can not be deleted. If users log in without
selecting a login user, the hidden default user is automatically used. You can configure some
rights for the default hidden user, such as monitor rights so that the user can view channels
without logging in.
TIP! General users should have fewer rights than administrators.
Adding a User
1.
www.honeywell.com/security
Figure 3-53 User Name Account Configurations
admin
a hidden user
Note User rights can not exceed group rights.
Click Add User. The Add User configuration interface opens.