Honeywell HEN04112 User Manual page 81

Table 3-22 GUI Configurations
Configuration
Image Enhance
Auto Logout
Startup Wizard
Navigation Bar
Original Scale
Tour Configurations
In the Tour interface, you can set the Tour Interval, Split mode, Motion Detection Tour, and
Alarm Tour modes.
Click the Tour tab in the DISPLAY configuration interface under SETTING to open the Tour
configuration interface.
Figure 3-50 Tour Configuration Interface
Table 3-23 Display Tour Settings
Setting
Enable Tour
Interval
Description
Check to enable Image Enhance, to optimize the preview
video.
Enter the how long the NVR waits before automatically
logging the user out.
Click to enable the Startup Wizard on restarting or starting up
the NVR.
Click to enable/disable the navigation bar.
Click Set to select to show channels in their original aspect
ratio. Unselected channels display in full screen.
Description
Check to enable this function.
Adjust the transparency. Select from 5s to 120s. The default
is 5s.
Configuration | 81
800-21261V2 - A - 03/2016