Configuring The Connection - Honeywell HEN04112 User Manual

42 | Performance Series Full Poe Embedded NVR Remote User Guide

Configuring the Connection

Click Connection under NETWORK to open the Connection configuration interface.
www.honeywell.com/security
Table 3-5 TCP/IP Configurations
Configuration
Alternate DNS
Note For the IPv6 version IP address, the Preferred DNS and Alternate DNS shall be no
more the 128 digits. They also can not be left blank.
LAN Download
Figure 3-8 Connection Configuration Interface
Table 3-6 Network Connection Configurations
Configuration Description
Max Connection The maximum Web connection for the same NVR. The value ranges
from 1 to 20. The default is 20.
TCP Port The default is 37777. You can enter the actual port number, if
necessary.
UDP Port The default is 37778. You can enter the actual port number, if
necessary.
HTTP Port The default is 80. You can enter the actual port number, if necessary.
RTSP Port The default is 554.
RTSP Format A non-configurable field that shows the RTSP format.
Description
Enter an alternate DNS IP address.
Enable this function so that the system can process the
downloaded data first. The download speed is 1.5X or 2.0X of
the normal speed.