Honeywell HEN04112 User Manual page 74

74 | Performance Series Full Poe Embedded NVR Remote User Guide
The schedules are color-coded by type:
•
•
•
•
www.honeywell.com/security
Figure 3-42 Schedule Configuration Interface
Green: General recording/snapshot.
Yellow: Motion detection recording/snapshot.
Red: Alarm recording/snapshot.
Blue: MD&Alarm recording/snapshot.
Table 3-17 Scheduled Storage Settings
Setting
Channel
Pre-record
Redundancy
Snapshot
Holiday
Description
Select a channel from the drop-down list
Enter a pre-recording time here. Select from 0 to 30.
You can configure the NVR to backup recorded files onto two
different HDDs. Click to enable.
Note Before you can enable this function, you must
configure at least one HDD as redundant. Go to Main
 
Menu Setting Storage
This function is not available if there is only one HDD.
Click to enable Snapshot.
Click to enable Holiday.

HDD Management).