Alarm Centre - Honeywell HEN04112 User Manual

56 | Performance Series Full Poe Embedded NVR Remote User Guide
2.
3.
4.
5.

Alarm Centre

You can connect your alarm platform to the NVR's Alarm Center to develop alarm
When a local alarm occurs, the NVR system can upload alarm signals to the Alarm Centre.
Before using the Alarm Centre, you must configure the server IP, Port, and Protocol Type.
When an alarm occurs, the NVR system can send data, as defined by the protocol, to the client.
1.
www.honeywell.com/security
Figure 3-20 Auto Register Configuration Interface
Click to enable Auto Registration.
Enter a Proxy Server IP, Port, and Sub device ID.
Click to enable Auto Registration.
Then click Save.
Click Alarm Center under NETWORK to open the Alarm Center configuration interface.
Figure 3-21 Alarm Centre Configuration Interface
functions.