Configuring Alarms - Honeywell HEN04112 User Manual

68 | Performance Series Full Poe Embedded NVR Remote User Guide
The configuration for Camera Tampering Detection is very similar to the configuration for
Motion Detection. Please see
information.

Configuring Alarms

Before alarm operation, you should check that you have properly connected all alarm devices,
such as buzzers and flashing lights.
Configuring Local Alarms
Click ALARM under EVENT to open the Local Alarm configuration interface.
www.honeywell.com/security
Figure 3-37 WEB - Alarm Configuration Interface
Motion Detection Configurations on page 62 for more