How To Enter The Alignment Tape Data - Panasonic AG-DVC30P Service Manual

1-7. How to Enter the Alignment Tape Data

1. Select the item "<4> Alignment Tape" on the LISTA main menu.
2. Select the item "<2> ENTRY" on the alignment menu.
3. After the screen displays the screen of <<Alignment Tape Data Entry>>, first input the Serial Number follow
the printed number on the tape label. And input the number "0" or "1" for selected the PAL/NTSC. And after
that enter the tape type, input "0" for DVCPRO, input "1" for DV or input "2" for HDLP.
4. After selecting the tape type, the frame for inputting the DATA and CHECK SUM appears on the screen. Input
the numerical value in numerical order on the data sheet, which is enclosed with alignment tape. If the wrong
number is inputted, the error message on the screen, then confirm that data on the sheet.
5. After the data entry, the screen returns to "LISTA MAIN" menu. Confirm the serial number of the alignment
tape.
<< Alignment Tape Data Entry >>
- 0.1
[1]
0.1
[2]
0.0
[3]
0.2
[4]
0.6
[5]
0.5
[6]
0.7
[7]
0.9
[8]
1.0
[9]
0.8
[10]
NOTE: This is sample only, you must enter information from your alignment tape. Each tape is different.
Serial No. Lrc-20 (NTSC) 10µ µ µ µ m
0.7
[11]
1.0
[12]
0.7
[13]
0.5
[14]
0.2
[15]
- 0.5
[16]
- 0.3
[17]
- 0.3
[18]
- 0.1
[19]
- 0.6
[20]
MECH-7
- 0.4
[21]
- 0.2
[22]
- 0.7
[23]
- 0.6
[24]
- 0.7
[25]
- 0.3
[26]
- 0.4
[27]
- 0.4
[28]
- 0.6
[29]
- 0.3
[30]
- 0.4
[31]
- 0.6
[32]
- 0.3
[33]
- 0.2
[34]
- 0.1
[35]
- 0.3
[36]
- 0.1
[37]
- 0.6
[CS]