10. Removal of Cassette Cover Unit
1. Remove the MIC Case Unit.
2. Remove the Side case R Unit.
3. Remove the POWER C.B.A..
4. Remove the TOP VF Unit.
5. Remove the Front Case Unit.
6. Remove the Lens Unit.
7. Remove the Rear Case Unit and CAMERA C.B.A..
8. Unscrew the 2 screws (A) and remove the Cassette Cover Unit as shown in figure 10-1.
(Note in installation)
1. Pass flexible cable through the portion "A" as shown in figure 10-2.
2. Attach the "B" portion to "C" portion as shown in figure 10-2 and tighten the 2 screws (A).
A
SCREW (A)
Figure 10-1
B
Figure 10-2
DIS-9
CASSETTE COVER UNIT
B
C
C