Panasonic AG-DVC30P Service Manual page 86

1-3. System Hook up Procedures
1. Unscrew the 2 screws and remove the EVR cover.
2. Connect the 2 pcs. of 30 pin flat cables (VFK1317) between P101/P102 on the Measuring Board (VFK1308P),
and 2 connectors on the EVR Connector Board (VFK1309A). Make sure that the contact surface of 2 pcs. of 30
pin Flat Cables are inner side and direction of the EVR Connector Board is as shown in Figures. Then connect
the Connection Adapter (VFK1763).
Connect VFK1763 with VFK1309A as
shown in picture.
If the connector is installed backwards,
it will not work.
SCREW
Part side
VFK1763
Connect the
VFK1763
ELE-2
EVR Cover
VFK1309A
30 pin Flat Cable
VFK1308P