Panasonic AG-DVC30P Service Manual page 100

5. ZOOM SW Center Value Adjustment
Be sure to save the CAMERA adjustment data into the Personal Computer, before performing adjustment.
This adjustment has to be performed, when the CASSETTE COVER UNIT or ZOOM SW in CASSETTE COVER
UNIT is replaced.
1. Open the "Camera adjustment menu".
2. Select "1. Zoom SW center value adjustment" in the camera adjustment menu, and then press "ENTER"
key.
3. Set to CAMERA mode in camera recorder following the message "Auto / Manually set to CAMERA mode.",
and then press "ENTER" key.
4. Below indicated screen is displayed.
5. Select a line "RAM 0800 - 08FF" by arrow key (↑/↓) and input a value as FE to column [ADRS].
6. Press Tele side of zoom switch on Grip Cover side to fully Tele position and release a finger slowly from button.
7. Write down displayed numerical value in column [DATA].
8. Input a value FF to column [ADRS] on line "RAM 0800 - 08FF" .
9. Write down displayed numerical value in column [DATA].
10. Repeat step 5 to 9 twice to write down the value.
11. Select the minimum measurement value.
12. Press Wide side of zoom switch on Cassette Cover side to fully wide position and release a finger slowly from
button and repeat step 5 to 9 three times.
13. Select the maximum measurement value.
ELE-16