Panasonic AG-DVC30P Service Manual page 51

12. Disconnect the 7 connectors (A),(B),(C),(D),(E),(F) and (G) on VTR C.B.A. as shown in figure 11-2.
13. Unscrew the 2 screws (B) and remove the VTR C.B.A. as shown in figure 11-3.
14. Unscrew the 3 screws (C) and remove the Mechanism Unit from Mech. Attachment Frame Unit as shown in
figure 11-3.
15. Unscrew the 2 screws (D) and remove the Garage Cover as shown in figure 11-3.
NOTE: In case a new Mechanism unit is installed, put the FPC Protection Sheet in the following position as
shown in figure 11-3.
SCREW (B)
VTR C.B.A
SCREW (C)
(A)
(C) (D)
(B)
Mechanism Unit
(F)
(E)
Figure 11-2
Hook to Mech. Attachment Frame Unit
SCREW (B)
Mech. Attachment Frame Unit
FPC Protection Sheet
Put sheet at the end of the mechanic chassis.
Figure 11-3
DIS-11
(G)
Garage Cover
SCREW (D)