How To Display The Error Rate - Panasonic AG-DVC30P Service Manual

5-1-1. How to display the Error Rate.

This unit can be displayed Error Rate and it shows the playing condition of the VCR.
In case of the error rate is displayed, BER DISPLAY and SAMPLE SPEED mode is select on DIAGNOSTIC menu.
DIAGNOSTIC MENU
BER DISPLAY
SAMPLE SPEED
DIF INF
VERSION
VTR
CAM
EEPROM CHK – SUM
PRESS MENU TO EXIT
DIAGNOSTIC MENU
BER DISPLAY
SAMPLE SPEED
DIF INF
VERSION
VTR
CAM
EEPROM CHK – SUM
PRESS MENU TO EXIT
When selecting TOTAL in BER DISPLAY
mode, it is displayed "TOT" and if select
VIDEO, it is displayed "VID" and if select
AUDIO, it is displayed "AUD".
TOT
TOT
How to confirm the Error rate.
1. Select the TOTAL in item of BER DISPLAY.
2. Record the color bar signal on LP mode and playback the recorded portion. Confirm that the number of bar on
display within 10 bars or less. The less bars displayed the better the error rate.
OFF VIDEO
AUDIO TOTAL
SLOW
OFF ON
(SOFT) (EEPROM)
1.00 1.00
1.00 1.00
01234H
OFF VIDEO
AUDIO TOTAL
SLOW FAST
OFF ON
(SOFT) (EEPROM)
1.00 1.00
1.00 1.00
01234H
CH1
CH2
CH1
CH2
Select VIDEO, AUDIO or TOTAL
by press MULTI-DIAL.
After selecting
mode, move to item of SAMPLE
SPEED by MULTI-DIAL.
When selecting item SAMPLE
SPEED, it is displayed together
with FAST in the item of SAMPLE
SPEED.
The Audio Level Meter is change
to error
selecting SAMPLE SPEED and
returning to the normal screen.
NOTE:
The display screen is changed
only in the VCR mode.
The color of the bar
In case of green display: Error rate is good
In case of red display: Error rate is bad
INF-8
BER DISPLAY
rate display, when