Panasonic AG-DVC30P Service Manual page 45

6. Removal of TOP VF Unit
1. Remove the MIC Case Unit.
2. Remove the Side Case R Unit.
3. Unscrew the 4 screws (A) as shown in figure 6-1.
4. Lift up the TOP VF and disconnect a connector P2215 on VTR C.B.A., then remove the TOP VF Unit as
shown in figure 6-1. Then be careful because the portion A and B are hooked together.
(Note in installation)
1. In case the flexible cable (A) is changed to new one, bend it to Z character as shown in figure 6-1.
2. The CCD Heat Sink is located to outside of TOP VF Unit as shown in figure 6-1.
SCREW (A)
Hook the A to B portion.
Do not give
damage to cable
TOP VF UNIT
B
A
Flexible Cable (A)
P2215
Figure 6-1
DIS-5
SCREW (A)
Outside of TOP VF Unit