Maintenance; Maintenance Schedule; Cleaning Of Tape Transport Part - Panasonic AG-DVC30P Service Manual

2. MAINTENANCE

Maintenance is done by periodically performing suitable maintenance servicing in order to maintain the best
condition, so that the user can use the equipment safely. Video equipment with mounted mechanisms have parts
which will wear, and their wear and deterioration cause troubles. Dust and dirt also can impair stable operation. For
this reason it is important not to just perform repair at the time of trouble, but also to perform suitable maintenance
at regular intervals.
The maintenance schedule requires replacement of mechanism unit, which contains a cylinder unit and so on.

2-1. Maintenance Schedule

No. Part Name
--- Tape Transport Part
1 Mechanism Chassis Unit
Note:
Hours of use are based on the head rotation hours. (Head rotation hours can be confirm on item DRUM RUN in
DIAGNOSTIC menu.)
Hours of use are recommendation. It may depend on temperature, humidity, quality of tape or dust condition.
Hours of use are listed as the reference of maintenance. They do not mean guarantee hours.
HOUR METER can be reset on ADJUST menu (Refer to item "5-2-4. Hour Meter Reset and LOG clear" in this
section.)
*1. Tape Transport part is cleaned by cleaning liquid.
*2. Please refer to the most recent execution outline, as the maintenance specifications and the part numbers may
change.

2-2. Cleaning of Tape Transport Part

Please clean the below indicated tape transport parts with cleaning liquid when needed.
(Tension Post, S1 Post, Cylinder & Heads, T1 Post, T2 Post, T3 Post, Capstan Shaft and Pinch Roller)
S1 Post
Tension Post
S2 Post
When
post, wrap a cloth on a
pick. Wipe each post
with a cloth dipped in
cleaning
Thin
wipe it again with dry
stick
cloth.
Part No.
------
VXY1843
Cylinder
Upper Cylinder
cleaning the
liquid. And
Lower Cylinder
Cleaning
100 hours
------
T1 Post T2 Post
INF-4
Replacement
------
Every 2000 hours
T3 Post
Capstan Shaft
Pinch Roller
LOADING condition
Head
Do not forget cleaning
the upper
Head, tape
part of Lower Cylinder
and Lead,
cleaning the Cylinder.
Lead
Remark
*1
*2
Cylinder,
transport
when