Panasonic AG-DVC30P Service Manual page 50

11. Removal of Mechanism Unit & VTR C.B.A.
1. Remove the MIC Case Unit.
2. Remove the Side Case R Unit.
3. Remove the POWER C.B.A..
4. Remove the TOP VF Unit.
5. Remove the Front Case Unit.
6. Remove the Lens Unit.
7. Remove the Rear Case Unit and CAMERA C.B.A..
8. Remove the Cassette Cover Unit.
9. Disconnect the connector P2219 and P2222 on VTR C.B.A. as shown in figure 11-1.
10. Disconnect the connector P2217 on VTR C.B.A. and P4101 on SIDE JACK C.B.A., then remove the flexible
cable (A) as shown in figure 11-1.
11. Unscrew the 6 screws (A) and remove the Unit (Mechanism & VTR C.B.A.) as shown in figure 11-1.
Cooling Sheet
P2222
SCREW (A)
P2217
B
C
Flexible Cable
(A)
P4101
NOTE: MECH Attachment Frame requires replacement, make sure to move the Cooling Sheet to the new MECH
Attachment Frame. See figure 11-1.
P2219
A
SCREW (A)
Figure 11-1
SCREW (A)
(Connection of A, B and C)
SCREW (A)
SIDE CASE L UNIT
DIS-10
P2222
P2217
P4101