Panasonic AG-DVC30P Service Manual page 235

3. Below indicated screen is displayed.
4. In case of data is change to FF from 70 on address 0542, select a line "EEPROM 0500-05FF" by arrow key
(↑/↓) and input a value as 42 to column [ADRS]. Next cursor is moved to column [DATA] by arrow key (→/←)
and input a value as FF. And press ENTER key to write to EEPROM.
Input data as [ADRS] is 42 and [DATA] is FF and press ENTER key
5. Please change the other part of address data follow the above description.
NOTE: The address is indicated as 4 digits of numerical value. Select the line based on first 2 digit and value
behind 2 digit is input value to column [ADRS].
EEPROM 0000-00FF
EEPROM 0100-01FF
EEPROM 0200-02FF
EEPROM 0300-03FF
EEPROM 0400-04FF
EEPROM 0500-05FF
EEPROM 0600-06FF
EEPROM 0700-07FF
After writing data, mark "!!" is displayed momentary.
In case of 00ED, select the line of "0000-00FF".
In case of 0542, select the line of "0500-05FF"
ELE-14
NOTE: This data is not original
data. Do not use this data.