Panasonic AG-DVC30P Service Manual page 165

3. Connect the Connection Adapter (VFK1763) to EVR connector in Unit. Then make sure that the direction of the
VFK1309A and VFK1763 are correct as shown in Figure.
When the VFK1763 is connected
the EVR connector, be careful
that VFK1309A is attached in the
right direction.
1-5. Connection of LISTA Adjustment System
VFM3000EDS (DV LISTA)
TAPE
Personal Computer (A/D Board should be installed.)
M. EQ
VFK1481K (LISTA Software), VFK1186 (LISTA Cable), VFK1300 (A/D Converter Board),
TOOL
VFK1308P (Measuring Board), VFK1409A (Measuring Board) ← NOTE 2
VFK1317 (30P flat cable): 2pcs, VFK1309A (EVR connector board) ← NOTE 1
VFK1763 (Connection Adapter), VJA0941 (DC cable): 2pcs, 9P RS232C cross cable.
In case of use VFK1409A
TP
F2 : ATF-ERR (VFK1409A), TP2 : TRG/HSW (VFK1409A), GND : GND (VFK1409A)
In case of use VFK1409S
F2 : ATF-ERR (VFK1409S), TP2 : TRG/HSW (VFK1810), GND : GND (VFK1409S)
NOTE 1:
VFK1309 and VFK1309A can be used to perform LISTA adjustment. The VFK1309A is only required for LCD
adjustment (refer to item 1 of Electrical adjustment procedure in section 4.)
NOTE 2:
If you already have VFK1409S (Measuring board), it can be used to perform LISTA adjustment with VFK1810.
Please refer to next explanation for installation of VFK1409S.
MECH-3