7. Removal of Front Case Unit
1. Remove the MIC Case Unit.
2. Remove the Side Case R Unit.
3. Remove the TOP VF Unit.
4. Unscrew the 3 screws (A) as shown in figure 7-1.
5. Disconnect a connector P6301 and remove the Front Case Unit as shown in figure 7-1.
(Note in installation)
1. When installing the Front Case Unit, do not give damage the Lens.
2. In case of the flexible cable (it connected with P6301 and CAMERA C.B.A.) is exchange to new one, bend it
to Z character to put under the Lens Unit.
Be careful not to damage the lens.
FRONT CASE UNIT
P6301
SCREW (A)
SCREW (A)
Bend flexible cable to put under the Lens Unit.
Figure 7-1
DIS-6