Diagnostic Menu (Vcr Mode); How To Display The Error Rate - Panasonic AG-DVX100BP Service Manual

5-2. DIAGNOSTIC MENU (VCR mode)

5-2-1. How to display the Error Rate.

This unit can be displayed Error Rate and it shows the playing condition of the VCR.
In case of the error rate is displayed, BER DISPLAY and SAMPLE SPEED mode is select on DIAGNOSTIC menu.
DIAGNOSTIC MENU
BER DISPLAY
SAMPLE SPEED
DIF INFO
CYLINDER
TAPE RUN
THREADING
PUSH MENU TO EXIT
DIAGNOSTIC MENU
BER DISPLAY
SAMPLE SPEED
DIF INFO
CYLINDER
TAPE RUN
THREADING
PUSH MENU TO EXIT
When selecting TOTAL in BER DISPLAY
mode, it is displayed "TOT" and if select
VIDEO, it is displayed "VID" and if select
AUDIO, it is displayed "AUD".
TOT
TOT
How to confirm the Error rate.
1. Select the TOTAL in item of BER DISPLAY.
2. Record the color bar signal on LP mode and playback the recorded portion. Confirm that the number of bar on
display within 10 bars or less. The less bars displayed the better the error rate.
OFF
OFF
VIDEO
SLOW
AUDIO
OFF
TOTAL
10000H
10000H
10000T
TOTAL
SLOW
SLOW
FAST
OFF
10000H
10000H
10000T
CH1
CH2
CH1
CH2
Select the item BER DISPLAY and press
SET(STILL) of OPERATION LEVER.
Select VIDEO,
OPERATION LEVER and press SET(STILL) of
OPERATION LEVER.
Factory default setting is "OFF".
After selecting BER DISPLAY mode, move to
item of SAMPLE
OPERATION LEVER in the DOWN (
direction.
Select SLOW or FAST by OPERATION LEVER
and press SET(STILL) of OPERATION LEVER.
Factory default setting is "SLOW".
The Audio Level Meter is change to error rate
display, when returning to the normal screen.
NOTE:
The display screen is changed only in the VCR
mode.
The color of the bar
In case of green display: Error rate is good
In case of red display: Error rate is bad
INF-12
AUDIO or TOTAL
SPEED by tilt
■
:STOP)
by
the