Table of Contents
Advertisement
MODE NAME
OSD Line Output Mode Checking the EVF
SERVICE MODE 1
SERVICE MODE 2
SERVICE MODE 3
SERVICE MODE 4
NOTE1:
The content of all service modes (service Mode 1 to 4) are the same as previous models.
Please refer to the following Technical Information.
Order number for Technical Information : VMD9512M138
NOTE2:
When an undesirable condition occurs, the power will be turned off except zoom & focus motor
lock condition. (Since this model, "ERROR CODE" is not automatically displayed on the EVF and
LCD monitor, even the CAMERA LEDis not flashed.)
By turning on Service Mode 3, it is possible to check what kind of undesirale condition has
occurred, even after the ERROR CODE has disappeared. Because of The ERROR CODE is
memorized to EEPROM-IC.
3.2. SERVICE MODE 3 (ERROR CODE DISPLAY)
- ERROR CODE appears on counter display position as follows. (See
Fig.1
).
FUNCTION
information on the TV
monitor
Remaining Battery A/D value.
/ Safety Device / Capstan/
Cylinder injuctions.
Remaining Voltage A/D value.
/ Mechanism position /
Serial key code
ERROR CODE Display
PG SHIFTER ADJUSTMENT
Push the following keys simultaneously more
sec.
FOCUS/SET
(SIDE CASE(R))
Push the following keys simultaneously more
sec.
COLOR
(SIDE CASE(R))
After chosing SERVICE MODE 1, push [DATE
key.
After chosing SERVICE MODE 2, push [DATE
key.
After chosing SERVICE MODE 3, push [DATE
key.
Fig.1
8
How to use.
STOP
(TOP
PANEL)
STOP
(TOP
PANEL)
(
CASE
TOP)
(
CASE
TOP)
Advertisement
Table of Contents
