Option 43 - Summer (Quick Menu Option 9); Option 44 - Trace - Honeywell Galaxy 3-48C Programming Manual

Galaxy 3 Series Programming Manual
Option 43 – Summer (Quick Menu Option 9)
The Daylight Savings Time is in accordance with European standards. The Daylight Savings time is described
as follows:
On the first day of each year, the British Summer Time (BST) Start date is set to the last Sunday in March
and the End date is set to the last Sunday in October.
The operation of the Summer option is as follows: at 01:00 hours (GMT) on the Start date, the system clock
advances to 02:00 hours (DST); at 02:00 hours (DST) on the End date, the system clock goes back to 01:00
hours (GMT).
NOTE: The time always changes with reference to GMT. For example, Italy, which is +1 hour would be:
Last Sunday in March - 02.00 to 03.00
Last Sunday in October – 03.00 to 02.00
The Start and End dates can be reprogrammed by authorized user codes. Press the A key to modify the
Start date or the B key select the End date; the new date must be a valid four-digit number - in the day/
month format (dd/mm).
Option 44 – Trace
This option provides a record of the most recent alarm activation. The Trace option records the details of the
setting and unsetting of the system immediately before and after the alarm activation and the first five events
occurring during the alarm activation. This information is maintained in the trace until the next alarm activation.
On entering the option pressing the A and B keys steps through each of the seven trace entries.
Pressing the # key while viewing the Trace option displays additional information about certain events — user
events reveal the keypad, user level and current group; alarm events reveal the zone descriptor if pro-
grammed.
The currently display trace can be printed out by pressing the
out.
NOTE: A serial printer must be connected to the Galaxy panel via the on-board serial port, a printer inter-
face module or an RS232 interface module.
Group Mode
If group mode is enabled (refer to option 63 = OPTIONS), there is a separate trace for the most recent
alarm activation in each of the groups. On selecting the Trace option, a user with group choice (refer to option
42 = CODES) can view the trace of the assigning groups; press the number of the group to be displayed —
the N below the selected group changes to a Y — and then press the ent key.
If more than one group is selected, or the user does not have group choice, then the trace for the group with
the most recent alarm activation is displayed.
43 - Summer/44 - Trace
key; pressing the esc key aborts the print-
39