Table of Contents
Advertisement
Faxing (Fax-Capable Printers Only)
Various Ways of Sending Faxes
Sending the Fax after Checking the Scanned Image
You can preview the scanned image on the LCD screen before sending the fax. (Monochrome faxes only)
1. Place the originals.
"Placing Originals" on page 42
2. Select Fax on the home screen.
3. Specify the recipient.
"Selecting Recipients" on page 132
4. Select the Fax Settings tab, and then make settings as necessary.
"Fax Settings" on page 145
5. Tap
, check the scanned document image.
-
: Moves the screen in the direction of the arrows.
-
: Reduces or enlarges.
-
: Moves to the previous or the next page.
Note:
❏ When Direct Send is enabled, you cannot preview.
❏ When the preview screen is left untouched for the time set in Settings > General Settings > Fax Settings > Send
Settings > Fax Preview Display Time, the fax is sent automatically.
6. Select Start Sending. Otherwise, select Cancel
Note:
The image quality of a sent fax may be different from what you previewed depending on the capability of the recipient
machine.
Sending Faxes Manually After Confirming the Recipient's Status
You can send a fax while listening to sounds or voices through the printer's speaker while dialing, communicating,
and transmitting.
1. Select Fax on the home screen.
2. Make necessary settings on the Fax Settings tab.
"Fax Settings" on page 145
3. On the Recipient tab, tap
Note:
You can adjust the sound volume of the speaker.
>
Sending Faxes Using the Printer
and then specify the recipient.
133
>
Various Ways of Sending Faxes
Advertisement
Table of Contents
