Epson WorkForce Pro WF-C878RB User Manual page 519

Administrator Information
Service Name Protocol type
FTP Control TCP
(Local)
FTP Data TCP
(Remote)
FTP Control TCP
(Remote)
CIFS (Local) TCP
CIFS (Remote) TCP
NetBIOS Name UDP
Service (Local)
NetBIOS UDP
Datagram
Service (Local)
NetBIOS Session TCP
Service (Local)
NetBIOS Name UDP
Service (Remote)
NetBIOS UDP
Datagram
Service (Remote)
NetBIOS Session TCP
Service (Remote)
HTTP (Local) TCP
HTTPS (Local) TCP
HTTP (Remote) TCP
HTTPS (Remote) TCP
Configuration Examples of IPsec/IP Filtering
Receiving IPsec packets only
This example is to configure a default policy only.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: IPsec
>
Advanced Security Settings
Local port Remote port
number
21 Any port
Any port 20
Any port 21
445 Any port
Any port 445
137 Any port
138 Any port
139 Any port
Any port 137
Any port 138
Any port 139
80 Any port
443 Any port
Any port 80
Any port 443
519
>
Encrypted Communication Using IPsec/IP Filtering
Features controlled
number
FTP server (controlling FTP printing)
FTP client (forwarding scan data and
received fax data)
However this can control only an FTP
server that uses remote port number
20.
FTP client (controlling to forward scan
data and received fax data)
CIFS server (Sharing a network folder)
CIFS client (forwarding scan data and
received fax data to a folder)
CIFS server (Sharing a network folder)
CIFS client (forwarding scan data and
received fax data to a folder)
HTTP(S) server (forwarding data of
Web Config and WSD)
HTTP(S) client (communicating
between Epson Connect, firmware
updating and root certificate
updating)