Epson WorkForce Pro WF-C878RB User Manual page 501

Administrator Information
Items
Allow RAW(Port9100) Printing
Printing Timeout (sec)
RAW(Custom Port) Settings
Items
Allow RAW(Custom Port) Printing
Port Number
Printing Timeout (sec)
IPP Settings
Items
Enable IPP
Allow Non-secure Communication
Communication Timeout (sec)
Require PIN Code when using IPP printing
URL(Network)
URL(Wi-Fi Direct)
Printer Name
Location
FTP Settings
Items
Enable FTP Server
Communication Timeout (sec)
>
Advanced Security Settings
Setting value and Description
Select to allow printing from the RAW port (Port 9100).
Enter the timeout value for RAW (Port 9100) printing be-
tween 0 to 3,600 seconds. If you do not want to timeout, en-
ter 0.
Setting value and Description
Select to allow printing from the RAW port (custom port).
Enter the port number for RAW printing between 1024 and
65535 (except for 9100, 1865, 2968).
Enter the timeout value for RAW (custom port) printing be-
tween 0 to 3,600 seconds. If you do not want to timeout, en-
ter 0.
Setting value and Description
Select to enable IPP communication. Only printers that sup-
port IPP are displayed.
Select Allowed to allow the printer to communicate without
any security measures (IPP).
Enter the timeout value for IPP printing between 0 to 3,600
seconds.
Select whether or not to require a PIN code when using IPP
printing. If you select Yes, IPP print jobs without PIN codes
are not saved in the printer.
Displays IPP URLs (http and https) when the printer is con-
nected to the network. The URL is a combined value of the
printer's IP address, Port number, and IPP printer name.
Displays IPP URLs (http and https) when the printer is con-
nected by Wi-Fi Direct. The URL is a combined value of the
printer's IP address, Port number, and IPP printer name.
Displays the IPP printer name.
Displays the IPP location.
Setting value and Description
Select to enable FTP printing. Only printers that support FTP
printing are displayed.
Enter the timeout value for FTP communication between 0
to 3,600 seconds. If you do not want to timeout, enter 0.
501
>
Controlling Using Protocols