Epson WorkForce Pro WF-C878RB User Manual page 455

Administrator Information
Kerberos Settings
If you select Kerberos Authentication for Authentication Method of LDAP Server > Basic, make the following
Kerberos settings from the Network tab > Kerberos Settings. You can register up to 10 settings for the Kerberos
settings.
Items
Realm (Domain)
KDC Address
Port Number (Kerberos)
Configuring the LDAP Server Search Settings
When you set up the search settings, you can use the email address and fax number registered to the LDAP server.
1. Access Web Config and select the Network tab > LDAP Server > Search Settings.
2. Enter a value for each item.
3. Click OK to display the setting result.
The settings you have selected are displayed.
Related Information
"Running Web Config on a Web Browser" on page 348
&
LDAP Server Search Setting Items
Items
Search Base (Distinguished Name)
Number of search entries
User name Attribute
User name Display Attribute
>
Settings to Use the Printer
Enter the realm of the Kerberos authentication in 255 characters or less in ASCII
(0x20-0x7E). If you do not register this, leave it blank.
Enter the address of the Kerberos authentication server. Enter 255 characters or
less in either IPv4, IPv6 or FQDN format. If you do not register this, leave it blank.
Enter the Kerberos server port number between 1 and 65535.
If you want to search an arbitrary domain, specify the domain name of the LDAP
server. Enter between 0 and 128 characters in Unicode (UTF-8). If you do not
search for arbitrary attribute, leave this blank.
Example for the local server directory: dc=server,dc=local
Specify the number of search entries between 5 and 500. The specified number of
the search entries is saved and displayed temporarily. Even if the number of the
search entries is over the specified number and an error message appears, the
search can be completed.
Specify the attribute name to display when searching for user names. Enter
between 1 and 255 characters in Unicode (UTF-8). The first character should be a-z
or A-Z.
Example: cn, uid
Specify the attribute name to display as the user name. Enter between 0 and 255
characters in Unicode (UTF-8). The first character should be a-z or A-Z.
Example: cn, sn
455
>
Making Contacts Available
Settings and Explanation
Settings and Explanation