Epson WorkForce Pro WF-C878RB User Manual page 387

Table of Contents

Advertisement

Product Information
*4
Use of the product outdoors over these channels is prohibited in Australia, New Zealand, China, and Hong Kong.
*5
Only available in Korea
*6
Use of this frequency range is prohibited in China.
*7
Channels 120, 124, and 128 are not available in Australia and New Zealand.
*8
Use of this frequency range is prohibited in Hong Kong.
*9
Not supported for IEEE 802.11b
*10 Infrastructure and Wi-Fi Direct modes or an Ethernet connection can be used simultaneously.
*11 Wi-Fi Direct only supports WPA2-PSK (AES) .
*12 Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specifications
Standards
Communication Mode
Connector
*1
Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2
The connected device should comply with IEEE802.3az standards.
Network Functions and IPv4/IPv6
Functions
Network Printing
EpsonNet Print (Windows)
Standard TCP/IP (Windows)
WSD Printing (Windows)
BonjourPrinting (Mac OS)
IPPPrinting (Windows, Mac
OS)
PictBridgePrinting (Wi-Fi)
Epson Connect (Email Print,
Remote Print)
AirPrint (iOS, Mac OS)
>
>
Product Specifications
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient Ethernet)
Auto, 10 Mbps Full duplex, 10 Mbps Half duplex, 100 Mbps Full duplex, 100 Mbps
Half duplex
RJ-45
IPv4
IPv4, IPv6
IPv4, IPv6
IPv4, IPv6
IPv4, IPv6
IPv4
IPv4
IPv4, IPv6
Network Specifications
*1
*1
*2
Supported
-
387
Remarks
-
-
Windows Vista or
later
-
-
Digital camera
-
iOS 5 or later, Mac
OS X v10.7 or later

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce pro wf-c878r seriesWorkforce pro wf-c878r

Table of Contents